EuroLite Outdoor Series User Manual download pdf (Page 15)

00019835.DOC, Version 1.1

15/34

DANGERTOLIFE!

Onlyinstallthelampwiththedeviceswitchedoff!

Unplugfrommainsbefore!

Thelamphastobereplacedwhenitisdamaged

ordeformedduetotheheat!

CAUTION!

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).

During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's

notes!

Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device

was not designed for. Damages caused by non-observance are not subject to warranty.

For the installation, you need one of the following lamps, depending upon device version:

OMNILUX JTT 230V/100W E27 1000h 2800K 88020000

OMNILUX JTT 230V/150W E27 1000h 2800K 88020001

OMNILUX JTT 230V/200W E27 1000h 2800K 88020002

OMNILUX JTT 230V/300W E40 1000h 2800K 88020003

OMNILUX JTT 230V/500W E40 1000h 2800K 88020004

OMNILUX JTT 230V/750W E40 1000h 2800K 88020005

OMNILUX JTT 230V/1000W E40 1000h 2800K 88020006

OMNILUX JTT 230V/1500W E40 1000h 2800K 88020007

OMNILUX JTT 230V/2000W E40 1000h 2800K 88020008

Procedure:

Step 1: Unscrew the cover screws.

Step 2: Remove the cover.

Step 3: If replacing the lamp, remove the old lamp from the lamp holder.

Step 4: Insert the lamp into the lamp holder.

Step 5: Replace the cover.

Step 6: Tighten the cover screws.

Do not operate this device with opened cover!

Overhead rigging

DANGER TO LIFE!

Please consider the EN 60598-2-17and the respective national standards during the installation!

The installation must only be carried out by an authorized dealer!

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

No comments

EuroLite Outdoor Series User Manual Page 15