EuroLite FBL-20 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
00042012.DOC, Version 1.1
31/33
6. OPERATION
With the POWER-switch, you can switch the device on and off.
Turn the keyswitch to ON.
Connect the laser interlock with the Interlock-socket.
In the AUTO-mode, the patterns are run automatically.
In the MUSIC-mode, the laser runs sound-controlled.
Special effects of the projection patterns can be created by using a smoke-machine. Make sure that you do
not use too much smoke so that the laser beam is swallowed after a short distance and the audience cannot
see the projections.
6.1 Remote control
Controlling laser ON/OFF, Sound active programs, Auto programs, patterns and color. See
the picture of remote controller.
A: Laser ON/OFF
Turn ON/OFF Laser output
B: Color
Displays colorful laser effects including: yellow/red/green etc. When you press the button, it
displays three color laser effects, including red, green and yellow.
C: Monochrome
Press the button to display yellow laser effects.Press again for red, again for green, and
again for yellow.
D: Sound actives
There are 10 built-in sound active programs ("Sound active"+buttons "1""9"). Press "Sound active", the unit
will run the default sound active programs including programs 1-9. After press "Sound active" and then press
any number of 1-9, the unit will run the specific sound active program corresponding to the number
E: AUTO
There are 10 built-in AUTO programs (“Auto”+buttons “1”-“9”). Press the button "Auto", the unit will run the
default AUTO programs. After you press the "Auto" and then press any number of 1-9, the unit will run the
specific AUTO program corresponding to the number
F: Pattern
Built-in 9 static Patterns numbered 1-9. After pressing the button "pattern" and then press any number of 1-9,
a specific pattern will be run corresponding to the number.The unit will show color, Sound active program
when selecting the Remote Control mode. Works equally to Sound active mode.
6.2 Operation via DIP-switches
0=OFF 1=ON X=0FF or ON
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10
SET DMX ADDRESS FOR DMX MODE
DIPSWITCH CHART
FUNCTION
DMX/SLAVE
SOUND ACTIVE
AUTO MODE
XXXXXXXX0 1
0
XXXXXXXX1 1
6.3 DMX-controlled operation
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
3
2
1
6
5
4
9
8
7
Remote control
Color
Mono chr
Sound
active
Auto
Pattern
Laser
O
N/OFF
Page view 30
1 2 ... 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments