EuroLite Disco Strobe 50 User Manual download pdf (Page 12)

52200611_V_1_0_4946.DOC

12/23

Do only use appropriate screws and make sure that the screws are properly connected with the ground.

DANGER TO LIFE!

Before taking into operation for the first time, the installation has to be approved by an expert!

OPERATION

Connect the stroboscope to the mains.

On the rear panel ot the Disco Strobe 50 there is a control to adjust the flash frequency (1-10 flashes per

second).

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an

expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a

skilled person once a year.

The following points have to be considered during the inspection:

1) All screws used for installing the devices or parts of the device have to be tighly connected and must not

be corroded.

2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a

skilled installer and any safety problems have to be removed.

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or

solvents!

The protective shield has to be replaced when it is obviously damaged,

so that its function is impaired, e. g. due to cracks or deep scratches!

CAUTION!

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only

in order to avoid hazards.

Should you have further questions, please contact your dealer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

No comments

EuroLite Disco Strobe 50 User Manual Page 12