EuroLite LED B-20 TCL User Manual download pdf (Page 13)

00046913.DOC, Version 1.1

13/30

This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.

Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The device must never be installed over areas, where persons may be seated or walk by.

o not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables lying around. You endanger your own and the safety of

others!

This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog

may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical

shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet

and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be

saturated with an amount of smoke that the visibility will always be more than 10 meters.

The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation

(particularly in cars) and heaters.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

This device must only be operated in an altitude between -20 and 2000 m over NN.

Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the

device during thunderstorms.

The symbol

---m

determines the minimum distance from lighted objects. The minimum distance

between light-output and the illuminated surface must be more than 0.1 meters.

The housing must never touch surrounding surfaces or objects.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the

fixture.

The maximum ambient temperature T

= 45° C must never be exceeded.

Operate the device only after having become familiarized with its functions. Do not permit operation by

persons not qualified for operating the device. Most damages are the result of unprofessional operation!

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

Never remove the serial barcode from the device as this would make the guarantee void.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, lamp explosion, crash etc.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

EuroLite LED B-20 TCL User Manual Page 13